Peavey IPR-1600 PA Power Amplifier 1060w 03001282

Peavey IPR 1600 power amplifier 1060w at 4 ohms.

Super lightweight PA power amplifier with up to 1600w power at 2 ohms. This high quality PA power amp has a switch-mode power supply which is very light and compact. This ensures that the power amplifier is very light-weight and fits into a 1U height 19" rack mount aluminium chassis.

The power amp is the future with it's cutting edge technology, incredible power and super lightweight.

The IPR 1600 PA power amplifier by Peavey features:
(Peavey IPR-1600 power amp manual)

• 1060w - 530 Watts RMS per channel into 4 Ohms
  1600w - 800 Watts RMS per channel into 2 Ohms
• resonant switch-mode power supply with high-speed class D topology
• 2 x Combination XLR and 1/4'' (6.35mm) input connectors which fits XLR or jack plugs
• 2 x Combination Neutrik Speakon and 1/4" (6.3mm) output connectors which fits speakon or jack plugs
• 2 x independent 100 Hz crossovers
• variable-speed fan
• lightweight aluminum chassis
• DDT speaker protection
• 2U space rack
• LED indicators for input signal, DDT and power
• Weight: - 3.23 kg (7.125 lbs.)

Peavey IPR 1600 Power Amplifier Technical Specifications

• Rated Power (2 x 2 ohms) - 800 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.
• Rated Power (2 x 4 ohms) - 530 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.
• Rated Power (2 x 8 ohms) - 300 watts per channel @ 1 kHz at <0.1% T.H.D. both channels driven.
• Rated Power (1 x 2 ohms) - 1000 watts @ 1 kHz at <0.1% T.H.D.
• Rated Power (1 x 4 ohms) - 600 watts @ 1 kHz at <0.1% T.H.D.
• Rated Power (1 x 8 ohms) - 320 watts @ 1 kHz at <0.1% T.H.D.
• Minimum Load Impedance - 2 ohms
• Maximum RMS Voltage Swing - 55 volts
• Frequency Response - 10 Hz - 50 kHz; +0, -3 dB at 1 watt
• T.H.D. (2 x 2 ohms) - <0.1% @ 600 watts per channel from 20 Hz to 1.5 kHz, decreasing to 500 watts at 20 kHz at <0.25%
• T.H.D. (2 x 4 ohms) - <0.1% @ 470 watts per channel from 20 Hz to 20 kHz
• T.H.D. (2 x 8 ohms) - <0.1% @ 250 watts per channel from 20 Hz to 20 kHz
• Input CMRR - > - 60 dB @ 1 kHz
• Voltage Gain - x 60 (+35 dB)
• Crossover - 100 Hz switchable 2nd order High pass and 3rd order Low Pass per channel
• Crosstalk - > -70 dB @ 1 kHz at 100 watts power @ 4 ohms
• Hum and Noise - > -105 dB, "A" weighted referenced to rated power @ 4 ohms
• Damping Factor (8 ohms) - > 170:1 @ 20 Hz - 1 kHz at 8 ohms
• Phase Response - +9 to - 86 degrees from 20 Hz to 20kHz
• Slew Rate: - > 12V/us
• Input Sensitivity - .775 volts +/- 3% for 1 kHz 4 ohm rated power, .68 volts +/- 3% for 1 kHz. 2 ohm rated power
• Input Impedance - 15k ohms, balanced and 7.5k ohms unbalanced.
• Current Draw @ 1/8 power - 550 watts @ 2 ohms, 390 watts @ 4 ohms, 250 watts @ 8 ohms
• Current Draw @ 1/3 power -1,160 watts @ 2 ohms, 810 watts @ 4 ohms, 460 watts @ 8 ohms
• Cooling - Temperature dependent variable speed 80 mm DC fan
• Controls - 2 front panel attenuators, crossover select switch for H.P.F, Normal and L.P.F.
• Indicator LEDs - 2 DDT (clip limiting), 2 Signal presence, 2 Active status, 2 Temp and 2 DC protect
• Protection - Thermal, DC, subsonic, incorrect loads, under and over voltage
• Connectors - Inputs: Dual Combi 1/4” XLR, Outputs: Dual 1/4” signal patch, dual Speakon connectors
• Construction - 0.062” thick aluminum
• Dimensions - 3.5”x19” x 10.5” behind front panel + 0.6” for handle
• Dimensions Packed - 4.72” x20.8” x 12.44” (120mm x 530mm x 316mm)
• Net Weight* - 3.23 kg (7.125 lbs.)
• Gross Weight - 4.31 kg (9.5 lbs.)
• Warranty - 5 years
• Rated power readings made with BW: <10 Hz to 22 kHz. All power measurements made at 120 VAC and 240VAC.
• 2 ohm power is time limited by circuit breaker.
• *Net Weight does not include power cord.