Peavey PV 2600 PA Amplifier 3600w 00512192
Peavey PV2600 PA power amplifiers 3600w (1800w RMS). Peavey PV2600 power amplifiers 1800w (900w RMS) power per channel at 4 ohms. The Peavey PV 2600 PA power amplifier is perfect for live bands, DJs,...
Peavey PV2600 PA power amplifiers 3600w (1800w RMS).
Peavey PV2600 power amplifiers 1800w (900w RMS) power per channel at 4 ohms. The Peavey PV 2600 PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installations. In compact 2 U rack size, the Peavey PV2600 PA power amplifier is massive power in a small package.
The PV 2600 works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required.
Peavey PV2600 PA Power Amplifier Specifications:
(Download PDF manual)
- Power Output: 4 ohms 900w RMS / 1800w program per channel
- Power Output: 8 ohms 550w RMS / 1100w program per channel
- Power Output Bridge Mode: 8 ohms 1800w RMS / 3600w program
- Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge
4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation
- DDT™ COMPRESSION: Automatic, switchable with LED indicator
- COOLING SYSTEM: Two-speed DC fan, air flow back to front
- LOW CUT FILTER: -3 dB @ 40 Hz, 12 dB per octave
- CROSSOVER: 150 Hz, 4-pole Linkwitz-Riley approximation
- INPUTS: Electronic balanced, with Barrier Strip or XLR, TRS 1/4" (6.3 mm) jack.
These are combination sockets which fit either a 6.3mm (1/4") jack male in the centre or an XLR male
- CROSSOVER OUTPUTS: Low/Thru and High, TS 1/4" (6.3 mm) jack
- AMPLIFIER OUTPUTS: 3 x Speakons for Chan A, Chan B and Bridge and Binding Posts
- LED INDICATORS: Red, DDT/clipping; Yellow, signal; Green, power
- AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load
- LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter
- DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)
- WEIGHT: 22.3kgs (49lbs)