Peavey PV1500 PA Power Amplifier 00512832
Peavey PV1500 PA power amplifiers 2000w. Peavey power amplifiers with 500w RMS (1000w program) power per channel at 4 ohms. The Peavey PV 1500 PA power amplifier is perfect for live bands, DJs,...
Peavey PV1500 PA power amplifiers 2000w.
Peavey power amplifiers with 500w RMS (1000w program) power per channel at 4 ohms. The Peavey PV 1500 PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installation, in a compact 2 U rack size.
The PV 1500 works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required.
Peavey PV1500 PA Power Amplifier Specifications:
(Download PDF manual)
- Power Output: 4 ohms 500w RMS / 1000w program per channel
- Power Output: 8 ohms 300w RMS / 600w program per channel
- Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge
4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation
- Power Output Bridge Mode: 8 ohms 1000w RMS / 2000w program
- DDT™ COMPRESSION ++: Automatic, switchable with LED indicator
- COOLING SYSTEM: Two-speed DC fan, air flow back to front
- LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave
- CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation
- INPUTS ++: Electronic balanced; Barrier Strip, XLR, TRS 1/4" (6.3 mm)
- CROSSOVER OUTPUTS ++: Low/Thru and High, TS 1/4" (6.3 mm)
- AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts
- LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power
- AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load
- LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter
- DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)
- WEIGHT: 20.5kg (45lbs)