How To Fit A Guitar Wall Hanger Instructions

Instructions for fitting Grip Studio guitar wall hanger to a wall.

It is easy to fit a Grip Studio hand shaped guitar wall hanger. Follow the easy instructions and you will soon be able to hang your guitar from a cool monster hand shaped guitar wall hanger.

GRIP STUDIOS HAND SHAPED GUITAR WALL HANGERS

WARNING:   Guitar hanger must be mounted to a brick / concrete wall, or to the wooden vertical stud of a dry-wall

Grip Studio Hand Shaped Guitar Wall hanger Includes:

• 1 x Guitar Hanger
• 1 x Hanger Bolt

Tools needed:

• Drill with 3/16 bit

How to mount a guitar wall hanger Grip Studio Instructions:

BRICK or CONCRETE WALL: Drill a hole into your masonry brick wall and insert a heavy duty rawl plug or wall plug

DRY WALL: Find a wooden upright or stud in your dry wall and drill a starter hole into stud.

Then take the wall mounting screw that came with your Grip Studios Guitar Hanger and screw the flat headed end into your guitar hanger so that the wall screw portion (pointed end) is protruding approximately 1 1/2 inches from the hanger felt bottom.

Then, holding the guitar hanger hand, insert the wall screw into the hole in the rawl plug or wall stud and rotate the hand. This will screw in the hanger into the wall. CAUTION: Grip the hand by the wrist section where it is strongest. Don't apply force to the fingers.

Continue to turn the guitar hanger until it tightens securely against the wall. Then make adjustments as needed to make sure your guitar hangs straight.

Guitar wall hanger screw must be securely mounted into the wall. Poorly mounted hangers may pull free from the wall and mounting your guitar hanger into drywall without mounting into the upright stud voids all warranty claims.

GRIP STUDIOS HAND SHAPED GUITAR WALL HANGERS